Circuit/System Verification
- Record the freeze frame/failure records.
- Vehicle in Service Mode.
- Verify DTC P0D08, P0D0F, P301C, P301D, U35A6, U35AB, U35BC, or U35C0 is not set.
- If any of the DTCs are set
- Go to next step: If none of the DTCs are set
- Verify that DTC P1EC5 is not set.
- If the DTC sets
- Go to next step: If the DTC is not set
- Verify that DTC P3061 is not set.
- If the DTC sets
Refer to Circuit/System Testing, High Voltage System Bus Diagnosis.
- Go to next step: If the DTC is not set
- If the DTC sets
- All OK.