Removal Procedure
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the left front tire and wheel assembly. Tire and Wheel Removal and Installation
Front Fender Paint Protector Bolt (1) - Remove [3x]
- Front Fender Paint Protector (2) - Remove
Rear Wheelhouse Liner Retainer (2) - Remove
- Front Wheelhouse Liner Bolt (1) - Remove [6x]
- Front Wheelhouse Rear Liner (3) - Remove
Rear Brake Rear Pipe Nut (1) - Remove
- Cap the front brake front pipe inlet to avoid fluid loss and contamination.
Rear Brake Rear Pipe Nut (1) - Remove
- Plug the brake master cylinder outlet port to avoid fluid loss and contamination.
Front Brake Front Pipe Clip (1) - Disengage [2x]
Maneuver the left front brake rear pipe (1) out of the vehicle.