Removal Procedure
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation
Front Brake Hose Bracket Bolt (1) - Remove [2x]
- Front Brake Hose Bracket Bolt (3) - Remove
- Rear Brake Front Pipe Nut (2) - Remove
- Cap the front brake pipe outlet to prevent brake fluid loss and contamination.
Front Brake Hose Fitting Bolt (2) - Remove
- Front Brake Hose Washer (3) - Remove and DISCARD [2x]
- Front Brake Hose (1) @ Front Brake Caliper - Remove
- Plug the front brake caliper inlet to prevent brake fluid loss and contamination.
Front Brake Hose (1) - Remove