Removal Procedure

Prepare the brake system control module for removal. Control Module References
Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
Courtesy of GENERAL MOTORS COMPANY

Turn the 3 front compartment sight shield retainers (1) a quarter turn counter clockwise to release.
Courtesy of GENERAL MOTORS COMPANY

Front Compartment Side Sight Shield (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Electrical Connector @ Brake System Control Module - Disconnect
Electronic Brake Control Module Bolt (2) - Remove and DISCARD [6x]
Brake System Control Module (1) - Remove