LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2022 >> Hummer EV >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Pedal Assembly Replacement >> Removal Procedure

Removal Procedure

  1. GM5835515Courtesy of GENERAL MOTORS COMPANY

    Electrical Connector (3) - Disconnect

  2. Wiring Harness Retainer (2) @ Brake Pedal - Remove
  3. Wiring Harness (1) - Position aside
  4. GM5835299Courtesy of GENERAL MOTORS COMPANY

    Brake Pedal Push Rod Bolt (1) - Remove

  5. Brake Pedal Nut (2) - Remove [5x]
  6. GM5787985Courtesy of GENERAL MOTORS COMPANY

    Turn the 3 front compartment sight shield retainers (1) a quarter turn counter clockwise to release.

  7. GM5787987Courtesy of GENERAL MOTORS COMPANY

    Front Compartment Side Sight Shield (1) - Remove

  8. GM5835298Courtesy of GENERAL MOTORS COMPANY

    Remove the brake master cylinder adapter nut (3) and with the aide of an assistant pull the brake master cylinder (1) away from the fire wall to gain clearance for the removal of the brake pedal.

  9. Brake Master Cylinder Gasket (2) - Remove and DISCARD
  10. GM5835300Courtesy of GENERAL MOTORS COMPANY

    Brake Pedal (1) - Remove

scientia non olet · About LEMON Manuals