Removal Procedure
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
Turn the 3 front compartment sight shield retainers (1) a quarter turn counter clockwise to release.
Front Compartment Side Sight Shield (1) - Remove
- Thoroughly clean the brake master cylinder reservoir and the brake master cylinder body to remove any dirt and debris.
- Electrical Connector @ Brake Fluid Level Indicator Switch - Disconnect
- Place a drain pan under the vehicle.
Brake Master Cylinder Bolt (1) - Remove [2x]
Brake Master Cylinder Reservoir (1) - Remove
- Brake Master Cylinder Reservoir Seal (2) - Remove and DISCARD [3x]
- Clean any brake fluid from the underbody area and remove the drain pan from under the vehicle.