Brake Pedal Pushrod Inspection
Disconnect the brake pedal pushrod (1) from the brake pedal.
- Inspect the brake pedal pushrod eyelet bushing (2), if equipped, for cracks and/or excessive wear.
- If the brake pedal pushrod eyelet bushing (2) exhibited cracks and/or excessive wear, then the brake master cylinder requires replacement. Brake Master Cylinder Replacement - With Power Brake Booster and Electronic Brake Control Module
- Reposition the pedal pushrod boot (3) toward the front of the vehicle to expose as much of the pedal pushrod (1) as possible.
- Inspect the brake pedal pushrod (1) for straightness.
- If the brake pedal pushrod (1) is not straight, then the brake master cylinder requires replacement. Brake Master Cylinder Replacement - With Power Brake Booster and Electronic Brake Control Module
- Return the pedal pushrod boot (3) to its original position on the pedal pushrod (1).
- Connect the brake pedal pushrod (1) to the brake pedal.