LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2022 >> Hummer EV >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Instrument Panel Wiring Harness Replacement >> Removal Procedure

Removal Procedure

  1. Instrument Panel Carrier - Remove - Instrument Panel Carrier Replacement 
  2. GM5814867

    Wiring Harness Retainer (1) - Remove [2x]

  3. GM5814868

    Instrument Panel Outer Air Outlet Bolt (1) - Remove

  4. GM5814869

    Instrument Panel Outer Air Outlet Duct Retainer (1) - Remove

  5. Wiring Harness Retainer (2) - Remove
  6. GM5814871

    Wiring Harness Retainer (1) - Remove

  7. Instrument Panel Outer Air Outlet Bolt (2) - Remove [2x]
  8. GM5814873

    Instrument Panel Outer Air Outlet Bolt (1) - Remove [2x]

  9. GM5814875

    Instrument Panel Outer Air Outlet Duct (1) - Remove

  10. GM5775694

    Release the retainers with a suitable plastic trim tool.

  11. Instrument Panel Lower Insulator Retainer (1) - Remove [4x]
  12. Instrument Panel Lower Trim Panel Insulator (2) - Remove
  13. GM5777893

    Reposition the front side door weatherstrips as necessary on both sides of the vehicle.

  14. Use a flat bladed plastic tool at the front of the side door sill garnish molding (1) to disengage the retaining clips from the front side door sill garnish molding (2).
    15. NOTE:

    Left side shown, right side similar.

  15. Side Door Sill Garnish Molding- Left Side and Right Side (1) - Loosen [2x]
  16. GM5777892

    Pull backwards from the top of the front side door sill garnish molding (1) to disengage the two clips on the forward vertical wall.

    17. NOTE:

    Left side shown, right side similar.

  17. Front Side Door Sill Garnish Molding- Left Side and Right Side (1) - Remove [2x]
  18. GM5823841

    Instrument Panel Wiring Harness Ground Bolt (1) - Remove [2x]

    19. NOTE:
    • Note the location and routing of the instrument panel wiring harness prior to removal to ensure proper installation.
    • Quantity of clips and routing of the front floor console wiring harness may vary based on option content.
  19. Release the wiring harness clips, electrical connectors and remove the instrument panel wiring harness (2).
  20. GM5823842
    NOTE:
    • Note the location and routing of the instrument panel wiring harness prior to removal to ensure proper installation.
    • Quantity of clips and routing of the front floor console wiring harness may vary based on option content.

    Release the wiring harness clips, electrical connectors and remove the instrument panel wiring harness (1).

  21. GM5823844

    Instrument Panel Wiring Harness Ground Bolt (1) - Remove [2x]

  22. Data Link Connector Bolt (2) - Remove [2x]
    23. NOTE:
    • Note the location and routing of the instrument panel wiring harness prior to removal to ensure proper installation.
    • Quantity of clips and routing of the front floor console wiring harness may vary based on option content.
  23. Release the wiring harness clips, electrical connectors and remove the instrument panel wiring harness (3).
scientia non olet · About LEMON Manuals