Removal Procedure
Using a suitable plastic trim tool, release the retaining tab.
- Instrument Panel Bolt Cover (1) - Remove [2x]
Using a suitable plastic trim tool, release the retaining tabs.
- Instrument Panel Upper Trim Panel Cover (1) - Remove
Radio Control Bolt (1) - Remove [2x]
Radio Control Bolt (1) - Remove [2x]
Disconnect the electrical connectors.
- Radio Control (1) - Remove
Instrument Panel Trim Plate Bolt (1) - Remove [2x]
- Using a flat-bladed plastic trim tool, release the retaining clips.
- Instrument Panel Trim Plate (2) - Remove