LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2022 >> Hummer EV >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Instrument Panel Trim Pad Replacement - Left Side >> Removal Procedure

Removal Procedure

  1. GM5775549
    NOTE:

    Left side shown, right side similar.

    Using a flat-bladed plastic trim tool, release the retaining clips on both sides of the vehicle.

  2. Instrument Panel Outer Trim Cover- Left Side and Right Side (1) - Remove [2x]
  3. GM5775858
    NOTE:

    Left side shown, right side similar.

    Reposition the weatherstrip as necessary.

  4. Use a flat-bladed plastic tool to disengage the retaining clip at the top of the body hinge pillar garnish molding (1) on both sides of the vehicle.
  5. Body Hinge Pillar Garnish Molding- Left Side and Right Side (1) - Remove [2x]
  6. GM5775868
    NOTE:

    Left side shown, right side similar.

    Use a flat bladed plastic tool to disengage the windshield pillar assist handle covers (1) from the windshield garnish molding on both sides of the vehicle.

  7. Windshield Pillar Assist Handle Cover- Left Side and Right Side (1) - Remove [4x]
  8. Windshield Pillar Assist Handle Bolt- Left Side and Right Side (2) - Remove [4x]
  9. GM5775880
    NOTE:

    Left side shown, right side similar.

    Using a flat-bladed plastic trim tool, release the retaining clips on both sides of the vehicle.

  10. Windshield Garnish Molding- Left Side and Right Side (1) - Remove [2x]
  11. Disconnect the electrical connector.
  12. GM5775849
    NOTE:

    Use a flat bladed plastic trim tool.

    Reposition the instrument panel extension (1) to access the electrical connector.

  13. Disconnect the electrical connector from the instrument panel extension (1).
  14. GM5775850

    Instrument Panel Extension (1) - Remove

  15. GM5811461

    Instrument Cluster Bolt (1) - Remove [4x]

  16. GM5811463

    Using a flat-bladed plastic trim tool, release the retaining clips.

  17. Reposition the instrument cluster (1) to access the electrical connector.
  18. Disconnect the electrical connector.
  19. Instrument Cluster (1) - Remove
  20. GM5765249

    Radio Front Speaker Grille Bolt (1) - Remove

  21. Using a suitable plastic trim tool, release the retaining tabs.
  22. Radio Front Speaker Grille (2) - Remove
  23. GM5796820

    Instrument Panel Fuse Block Access Hole Cover (1) - Remove

  24. Instrument Panel Knee Bolster Bolt (2) - Remove [2x]
  25. GM5796821

    Using a flat-bladed plastic trim tool, release the retaining clips.

  26. Reposition the component to access the electrical connectors.
  27. Disconnect the electrical connectors.
  28. Instrument Panel Knee Bolster (1) - Remove
  29. GM5808418

    Instrument Panel Outer Air Outlet Bolt (1) - Remove [4x]

  30. GM5808419

    Using a suitable plastic trim tool, release the retaining tabs.

  31. Instrument Panel Air Outlet Bezel (1) - Remove
  32. GM5812952

    Instrument Panel Trim Pad Bolt (1) - Remove [3x]

  33. Using a flat-bladed plastic trim tool, release the retaining clips.
  34. Instrument Panel Trim Pad - Left Side (2) - Remove
scientia non olet · About LEMON Manuals