Installation Procedure

CAUTION:

Instrument Panel Trim Pad Bolt (1) - Install and tighten [3x] - Fastener Specifications
Instrument Panel Air Outlet Bezel (1) - Install
Instrument Panel Outer Air Outlet Bolt (1) - Install and tighten [4x] - Fastener Specifications
Connect the electrical connectors.
Instrument Panel Knee Bolster (1) - Install
Instrument Panel Knee Bolster Bolt (2) - Install and tighten [2x] - Fastener Specifications
Instrument Panel Fuse Block Access Hole Cover (1) - Install
Radio Front Speaker Grille (2) - Install
Secure the retaining tabs.
Radio Front Speaker Grille Bolt (1) - Install and tighten - Fastener Specifications
Connect the electrical connector.
Instrument Cluster (1) - Install
Instrument Cluster Bolt (1) - Install and tighten [4x] - Fastener Specifications
Connect the electrical connector.
Instrument Panel Extension (1) - Install
NOTE:
Left side shown, right side similar.

Connect the electrical connector.
Windshield Garnish Molding- Left Side and Right Side (1) - Install [2x]
NOTE:
Left side shown, right side similar.

Windshield Pillar Assist Handle Bolt- Left Side and Right Side (2) - Install and tighten [4x] - Fastener Specifications
Windshield Pillar Assist Handle Cover- Left Side and Right Side (1) - Install [4x]
NOTE:
Left side shown, right side similar.

Body Hinge Pillar Garnish Molding- Left Side and Right Side (1) - Install [2x]
Install the weatherstrip as necessary.
NOTE:
Left side shown, right side similar.

Instrument Panel Outer Trim Cover- Left Side and Right Side (1) - Install [2x]