LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2022 >> Hummer EV >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Instrument Panel Knee Bolster Deflector Replacement >> Removal Procedure

Removal Procedure

  1. GM5775549

    Using a flat-bladed plastic trim tool, release the retaining clips.

  2. Instrument Panel Outer Trim Cover (1) - Remove
  3. GM5796820

    Instrument Panel Fuse Block Access Hole Cover (1) - Remove

  4. Instrument Panel Knee Bolster Bolt (2) - Remove [2x]
  5. GM5796821

    Using a flat-bladed plastic trim tool, release the retaining clips.

  6. Reposition the component to access the electrical connectors.
  7. Disconnect the electrical connectors.
  8. Instrument Panel Knee Bolster (1) - Remove
  9. GM5821161

    Instrument Panel Carrier Bolt (1) - Remove [6x]

  10. Instrument Panel Outer Air Outlet Bolt (2) - Remove
  11. Instrument Panel Trim Pad Bolt (3) - Remove [2x]
  12. GM5821162

    Instrument Panel Knee Bolster Deflector Bolt (1) - Remove [4x]

  13. GM5821164
    NOTE:

    Some components not shown for graphic clarity.Reposition the instrument panel carrier to access the instrument panel knee bolster deflector.

    Disconnect the wiring harness retainers and reposition the harness as necessary.

  14. Instrument Panel Knee Bolster Deflector (1) - Remove
scientia non olet · About LEMON Manuals