Installation Procedure

Sun Load Temperature and Headlamp Automatic Control Ambient Light Sensor (1) - Install
Connect the electrical connector.
Instrument Panel Extension (1) - Install
NOTE:
Left side shown, right side similar.

Connect the electrical connector.
Windshield Garnish Molding- Left Side and Right Side (1) - Install [2x]
CAUTION:
Refer to Fastener Caution .

NOTE:
Left side shown, right side similar.

Windshield Pillar Assist Handle Bolt- Left Side and Right Side (2) - Install and tighten [4x] - Fastener Specifications
Windshield Pillar Assist Handle Cover- Left Side and Right Side (1) - Install [4x]
NOTE:
Left side shown, right side similar.

Body Hinge Pillar Garnish Molding- Left Side and Right Side (1) - Install [2x]
Install the weatherstrip as necessary.
NOTE:
Left side shown, right side similar.

Instrument Panel Outer Trim Cover- Left Side and Right Side (1) - Install [2x]