Installation Procedure
Install the instrument panel compartment door lock cylinder (1) at the 12 o'clock position while holding the retainer tumbler (2) depressed into the instrument panel compartment door latch (3).
- Return the instrument panel compartment door latch (3) to the close position.
- Ensure proper operation of the instrument panel compartment door lock cylinder (1).
Instrument Panel Compartment (1) - Install
- CAUTION:
Refer to Fastener Caution .
Instrument Panel Compartment Bolt (1) - Install and tighten [3x] - Fastener Specifications
Instrument Panel Compartment Bolt (1) - Install and tighten [5x] - Fastener Specifications
- NOTE:
Left side shown, right side similar.
Instrument Panel Outer Trim Cover- Right Side (1) - Install