Removal Procedure
Instrument Panel Upper Trim Panel (1) - Remove - Instrument Panel Upper Trim Panel Removal and Installation
Steering Column (1) - Remove - Steering Column Removal and Installation
Instrument Panel Trim Plate Bolt (1) - Remove [2x]
- Using a flat-bladed plastic trim tool, release the retaining clips.
- Instrument Panel Trim Plate (2) - Remove
Front Floor Console Auxiliary Cooling Duct Bolt (1) - Remove
Instrument Panel Carrier Bolt (1) - Remove [17x]
Instrument Panel Carrier Bolt (1) - Remove [3x]
- Instrument Panel Outer Air Outlet Bolt (2) - Remove
- NOTE:
Note the location and routing of the instrument panel wiring harness prior to removal to ensure proper installation.
Reposition the instrument panel carrier (1) to access the harness clips.
- Disconnect and reposition harness as necessary.
- Instrument Panel Carrier (1) - Remove