Installation Procedure
Instrument Panel Air Outlet Bezel (1) - Install
- CAUTION:
Refer to Fastener Caution .
Instrument Panel Outer Air Outlet Bolt (1) - Install and tighten [4x] - Fastener Specifications
Instrument Panel Compartment (1) - Install
Open the instrument panel compartment door.
- Instrument Panel Compartment Bolt (1) - Install and tighten [3x] - Fastener Specifications
Instrument Panel Compartment Bolt (1) - Install and tighten [5x] - Fastener Specifications
- NOTE:
Left side shown, right side similar.
Radio Front Speaker Grille- Right Side (2) - Install
- Secure the retaining tabs.
- Radio Front Speaker Grille Bolt (1) - Install and tighten - Fastener Specifications
Connect the electrical connector.
- Instrument Panel Extension (1) - Install
- NOTE:
Left side shown, right side similar.
Connect the electrical connector.
- Windshield Garnish Molding- Left Side and Right Side (1) - Install [2x]
- NOTE:
Left side shown, right side similar.
Windshield Pillar Assist Handle Bolt- Left Side and Right Side (2) - Install and tighten [4x] - Fastener Specifications
- Windshield Pillar Assist Handle Cover- Left Side and Right Side (1) - Install [4x]
- NOTE:
Left side shown, right side similar.
Body Hinge Pillar Garnish Molding- Left Side and Right Side (1) - Install [2x]
- Install the weatherstrip as necessary.
- NOTE:
Left side shown, right side similar.
Instrument Panel Outer Trim Cover- Left Side and Right Side (1) - Install [2x]