Installation Procedure
Instrument Panel Air Outlet Bezel (1) - Install
- CAUTION:
Refer to Fastener Caution .
Instrument Panel Outer Air Outlet Bolt (1) - Install and tighten [4x] - Fastener Specifications
Connect the electrical connectors.
- Instrument Panel Knee Bolster (1) - Install
Instrument Panel Knee Bolster Bolt (2) - Install and tighten [2x] - Fastener Specifications
- Instrument Panel Fuse Block Access Hole Cover (1) - Install
Radio Front Speaker Grille (2) - Install
- Secure the retaining tabs.
- Radio Front Speaker Grille Bolt (1) - Install and tighten - Fastener Specifications
Connect the electrical connector.
- Instrument Panel Extension (1) - Install
- NOTE:
Left side shown, right side similar.
Connect the electrical connector.
- Windshield Garnish Molding- Left Side and Right Side (1) - Install [2x]
- NOTE:
Left side shown, right side similar.
Windshield Pillar Assist Handle Bolt- Left Side and Right Side (2) - Install and tighten [4x] - Fastener Specifications
- Windshield Pillar Assist Handle Cover- Left Side and Right Side (1) - Install [4x]
- NOTE:
Left side shown, right side similar.
Body Hinge Pillar Garnish Molding- Left Side and Right Side (1) - Install [2x]
- Install the weatherstrip as necessary.
- NOTE:
Left side shown, right side similar.
Instrument Panel Outer Trim Cover- Left Side and Right Side (1) - Install [2x]