Removal Procedure
Front Floor Console (1) - Remove - Front Floor Console Removal and Installation
Front Floor Console Rear Cover Bolt- Left Side and Right Side (1) - Remove [2x]
Open the armrest cover.
- Release the retainers with a suitable plastic trim tool.
- Front Floor Console Rear Trim Plate (1) - Remove
- Front Floor Console Rear Cover Bolt (2) - Remove [2x]
Release the retainers with a suitable plastic trim tool.
- Reposition the component to access the electrical connectors.
- Disconnect the electrical connectors.
- Front Floor Console Rear Trim Panel (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Rear Console Side Trim Panel- Left Side and Right Side (1) - Remove [2x]
Front Floor Console Storage Tray Bolt (1) - Remove [8x]
- Unclip the front floor console wiring harness (2) and reposition away from the front floor console stowage tray.
Front Floor Console Stowage Tray- Lower (1) - Remove
- Reposition the component to access the electrical connectors.
- Disconnect the electrical connectors.
- Front Floor Console Stowage Tray- Upper (2) - Remove
Release the retainers with a suitable plastic trim tool.
- Reposition the front floor console cup holder trim plate (1) to access the electrical connectors.
- Disconnect the electrical connectors.
- Front Floor Console Cup Holder Trim Plate (1) - Remove
Automatic Transmission Control Bolt (1) - Remove [4x]
- Gear Shift Control Module (2) - Remove
- Disconnect the electrical connectors.
Remove the front floor console rear air duct harness retainer.
- Front Floor Console Rear Air Duct Bolt (1) - Remove [3x]
Front Floor Console Rear Air Rear Duct (1) - Remove
- NOTE:
Quantity of clips and routing of the front floor console wiring harness may vary based on option content.
Release the wiring harness clips and remove the front floor console wiring harness (1).
- NOTE:
Quantity of clips and routing of the front floor console wiring harness may vary based on option content.
Release the wiring harness clips, electrical connectors and remove the front floor console wiring harness (1).
- NOTE:
Quantity of clips and routing of the front floor console wiring harness may vary based on option content.
Release the wiring harness clips, electrical connectors and remove the front floor console wiring harness (1).