Removal Procedure
Front Floor Console (1) - Remove - Front Floor Console Removal and Installation
Front Floor Console Rear Cover Bolt- Left Side and Right Side (1) - Remove [2x]
Open the armrest cover.
- Release the retainers with a suitable plastic trim tool.
- Front Floor Console Rear Trim Plate (1) - Remove
- Front Floor Console Rear Cover Bolt (2) - Remove [2x]
Release the retainers with a suitable plastic trim tool.
- Reposition the component to access the electrical connectors.
- Disconnect the electrical connectors.
- Front Floor Console Rear Trim Panel (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Rear Console Side Trim Panel- Left Side and Right Side (1) - Remove [2x]
Front Floor Console Storage Tray Bolt (1) - Remove [8x]
- Unclip the front floor console wiring harness (2) and reposition away from the front floor console stowage tray.
Front Floor Console Stowage Tray- Lower (1) - Remove
- Reposition the component to access the electrical connectors.
- Disconnect the electrical connectors.
- Front Floor Console Stowage Tray- Upper (2) - Remove
Release the retaining tabs.
- Front Floor Console Compartment Lamp (1) - Remove