Removal Procedure
Remove the left and right front floor mat (1).
- NOTE:
Use a flat bladed plastic trim tool.
Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Remove
- Front Floor Console Extension Bolt (2) - Remove
Move the front seat to access the retainers.
- Front Floor Console Extension Panel (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Lower Applique (1) - Remove
Tire Repair Sealer and Tire Air Compressor Retainer (1) - Remove
- Tire Air Compressor (2) - Remove
Rear Floor Mat (1) - Remove
Move the front seat to access the retainers.
- Front Floor Console Bolt Access Hole Cover (1) - Remove
- Front Floor Console Retainer Bolt (2) - Remove [5x]
- NOTE:
Use a flat bladed plastic trim tool.
Move the front seat to access the retainers.
- Front Floor Console Extension Panel (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Lower Applique (1) - Remove
Move the front seat to access the retainers.
- Front Floor Console Bolt Access Hole Cover (1) - Remove
- Front Floor Console Retainer Bolt (2) - Remove [5x]
Disconnect and reposition harness as necessary.
- With the aid of an assistant, remove the front floor console (1) from the vehicle.
NOTE:
Use a flat bladed plastic trim tool.
NOTE:
Use a flat bladed plastic trim tool.