Installation Procedure
Low Frequency Console Number 2 Antenna (1) - Install
- Secure the retaining tab.
Accessory Power Receptacle (1) - Install
Front Floor Console Rear Air Outlet (1) - Install [2x]
- Secure the retaining tabs.
Heater and Air Conditioning Auxiliary Control (2) - Install
- Heater and Air Conditioning Auxiliary Control Bolt (1) - Install and tighten [4x] - Fastener Specifications
Dual Charge Only Receptacle (1) - Install
- Secure the retaining tabs.
Connect the electrical connectors.
- Front Floor Console Rear Trim Panel (1) - Install
Front Floor Console Rear Cover Bolt (2) - Install and tighten [2x] - Fastener Specifications
- Front Floor Console Rear Trim Plate (1) - Install
- Close the armrest cover.
Front Floor Console Rear Cover Bolt (2) - Install and tighten - Fastener Specifications
- Front Floor Console Bolt Access Hole Cover (1) - Install
Front Floor Console Rear Cover Bolt (2) - Install and tighten - Fastener Specifications
- Front Floor Console Bolt Access Hole Cover (1) - Install
- Return the seat to its original position.
Rear Floor Mat (1) - Install
Tire Air Compressor (2) - Install
- Tire Repair Sealer and Tire Air Compressor Retainer (1) - Install and hand tighten
CAUTION:
Refer to Fastener Caution .