Installation Procedure

Front Floor Console Center Compartment (2) - Install

CAUTION:

Refer to Fastener Caution .

Front Floor Console Bolt (1) - Install and tighten [3x] - Fastener Specifications
USB 2 Port Receptacle (1) - Install
Ensure that the retaining tabs are fully secured.
Install the Wireless Charging System Module Bracket (2) and Wireless Charging System Module (3) as an assembly.
Wireless Charging System Module Bracket Bolt (1) - Install and tighten [x2] - Fastener Specifications
Front Floor Console Cup Holder (2) - Install
Front Floor Console Bolt (1) - Install and tighten [4x] - Fastener Specifications
Connect the electrical connectors.
Front Floor Console Cup Holder Trim Plate (1) - Install
Front Floor Console (1) - Install
Connect the electrical connectors to the front floor console (1).
Front Floor Console Retainer Bolt (2) - Install and tighten [5x] - Fastener Specifications
Front Floor Console Bolt Access Hole Cover (1) - Install
Front Floor Console Lower Applique (1) - Install
Front Floor Console Extension Panel (1) - Install
Front Floor Console Retainer Bolt (2) - Install and tighten [5x] - Fastener Specifications
Front Floor Console Bolt Access Hole Cover (1) - Install
Rear Floor Mat (1) - Install
Tire Air Compressor (2) - Install
Tire Repair Sealer and Tire Air Compressor Retainer (1) - Install and hand tighten
Front Floor Console Lower Applique (1) - Install
Front Floor Console Extension Panel (1) - Install
Front Floor Console Extension Bolt (2) - Install and tighten - Fastener Specifications
Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Install
Install the left and right front floor mat (1).
Return the seat to its original position.