Installation Procedure
Front Floor Console Armrest (1) - Install
Front Floor Console Armrest Dampener (3) - Install
- Front Floor Console Armrest Nut (2) - Install and tighten - Fastener Specifications
- Front Floor Console Armrest Bolt (1) - Install and tighten - Fastener Specifications
Front Floor Rear Console Side Trim Panel (1) - Install
Front Floor Console Armrest Dampener (3) - Install
- Front Floor Console Armrest Bolt (2) - Install and tighten - Fastener Specifications
- Front Floor Console Armrest Nut (1) - Install and tighten - Fastener Specifications
Front Floor Rear Console Side Trim Panel (1) - Install
Connect the electrical connectors.
- Front Floor Console Rear Trim Panel (1) - Install
Front Floor Console Rear Cover Bolt (2) - Install and tighten [2x] - Fastener Specifications
- Front Floor Console Rear Trim Plate (1) - Install
- Close the armrest cover.
Front Floor Console Rear Cover Bolt (2) - Install and tighten - Fastener Specifications
- Front Floor Console Bolt Access Hole Cover (1) - Install
Front Floor Console Rear Cover Bolt (2) - Install and tighten - Fastener Specifications
- Front Floor Console Bolt Access Hole Cover (1) - Install
- Return the seat to its original position.
Rear Floor Mat (1) - Install
Tire Air Compressor (2) - Install
- Tire Repair Sealer and Tire Air Compressor Retainer (1) - Install and hand tighten
CAUTION:
Refer to Fastener Caution .