LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2022 >> Acadia SLE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Engine Mount Inspection

Engine Mount Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Install the engine support fixture. Engine Support Fixture 
  2. Raise the engine to remove the weight from the engine mount and create a slight tension on the rubber.
  3. Replace the engine mount if the engine mount exhibits any of the following conditions:
    • The hard rubber is covered with cracks.
    • The rubber is separated from the metal plate of the engine mount.
    • The rubber is split through the center of the engine mount.
  4. For engine mount replacement, refer to Engine Mount Replacement - Right Side .
scientia non olet · About LEMON Manuals