Valve Rocker Arm Oil Control Valve Replacement - Bank 1
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Camshaft Housing Cover Insulator Replacement - Right Side |
|
| 1 | Valve Rocker Arm Oil Control Valve Bolt
CAUTION:
Refer to Fastener Caution . Tighten 10 N.m (89 lb in) |
| 2 | Valve Rocker Arm Oil Control Valve Procedure Inspect the O-ring and replace if necessary. [3x]
NOTE:
Lubricate the O-rings with engine oil. |