Manifold Absolute Pressure Sensor Replacement
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Air Cleaner Outlet Duct Replacement |
|
| 1 | Electrical Connector |
| 2 | Manifold Absolute Pressure Sensor Fastener
CAUTION:
Refer to Fastener Caution . Tighten: 4 N.m (35 lb in) |
| 3 | Manifold Absolute Pressure Sensor |
| 4 | Manifold Absolute Pressure Sensor Seal
NOTE:
Always install the seal supplied with the manifold absolute pressure sensor. |