Knock Sensor Replacement - Bank 2
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Warm Up Three-Way Catalytic Converter- Bank 2 - Warm Up Three-Way Catalytic Converter Replacement (Bank 2, LGX) |
|
| 1 | Electrical Connector |
| 2 | Knock Sensor Bolt
CAUTION:
Refer to Fastener Caution . Tighten 25 N.m (18 lb ft) |
| 3 | Knock Sensor |