LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2022 >> Acadia SLE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Controls And Fuel - 3.6L (LGX) - Diagnostic Information And Procedures (3 Of 3)) >> Diagnostic Information and Procedures >> DTC P16D7-P16D9 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different variant/trim than selected.

For an overview of the component/system, refer to: Fuel System Description

Circuit Description
Control - Terminal 2 @ K111 Fuel Pump Power Control Module The output circuit is switched to ground to activate the component.
Component Description
K20 Engine Control Module The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly.
K111 Fuel Pump Power Control Module The control module contains a microprocessor used to process input data to control outputs.
The control module communicates with the engine control module via serial data.
scientia non olet · About LEMON Manuals