LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2022 >> Acadia AT4 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Front Floor Console Removal and Installation >> Removal Procedure

Removal Procedure

  1. GM5344324Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Extension Panel - Left Side (3) - Remove - Front Floor Console Extension Panel Replacement - Left Side 

  2. GM5346450Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Extension Panel - Right Side (3) - Remove - Front Floor Console Extension Panel Replacement - Right Side 

  3. GM5358874Courtesy of GENERAL MOTORS COMPANY

    Use a suitable tool to release the front floor console bolt access hole cover (1) from the front floor rear console side trim panel.

  4. Front Floor Console Retainer Bolt (2) - Remove [5x]
  5. GM5358877Courtesy of GENERAL MOTORS COMPANY

    Use a suitable tool to release the front floor console bolt access hole cover (1) from the front floor rear console side trim panel.

  6. Front Floor Console Retainer Bolt (2) - Remove [5x]
  7. GM5359272Courtesy of GENERAL MOTORS COMPANY

    Slide the front floor console back to clear the pins from the instrument panel.

  8. GM5359273Courtesy of GENERAL MOTORS COMPANY

    Disconnect the electrical connectors.

  9. With the aid of an assistant, lift and remove the front floor console (1) from the vehicle.
  10. Transfer components as necessary.