Fastener Specifications
Dual Horn
| Callout | Component Name [ Component Quantity ] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Horn Nut [ 2x ] | - | - | 9 N.m (80 lb in) | Horn Replacement |
| Callout | Component Name [ Component Quantity ] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Horn Nut [ 2x ] | - | - | 9 N.m (80 lb in) | Horn Replacement |