Removal Procedure

Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (KL9)
Raise and support the vehicle. Lifting and Jacking the Vehicle
Remove the rear tire and wheel assemblies. Tire and Wheel Removal and Installation (Aluminum Wheel)
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Rear Wheelhouse Liner Bolt (1) - Remove [ 8x ]
Rear Wheelhouse Liner Retainer (2) - Remove [ 2x ]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Rear Wheelhouse Liner Bolt (1) - Remove [ 6x ]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Rear Wheelhouse Liner Bolt (1) - Remove [ 14x ]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Rear Wheelhouse Liner (1) - Remove [ 2x ]
Courtesy of GENERAL MOTORS COMPANY

Rear Brake Crossover Pipe Nut (1) - Remove
Plug the rear brake front pipe nut to avoid fluid loss and contamination.
Courtesy of GENERAL MOTORS COMPANY

Rear Brake Crossover Pipe (1) @ Retainer Clip - Remove
Courtesy of GENERAL MOTORS COMPANY

Rear Brake Crossover Pipe Retainer (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Rear Brake Crossover Pipe Retainer (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Rear Brake Crossover Pipe Nut (1) - Remove
Rear Brake Crossover Pipe Retainer (2) - Remove [ 2x ]
Plug the rear brake rear pipe inlet to avoid fluid loss and contamination.
Courtesy of GENERAL MOTORS COMPANY

Rear Brake Crossover Pipe (1) - Remove