LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Yukon XL AT4 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Rear Side Door Replacement >> Removal Procedure

Removal Procedure

  1. Apply a double layer of masking tape around the perimeter of the painted surfaces.
  2. GM5518397Courtesy of GM

    Disconnect the electrical connector. (1)

  3. GM5519149Courtesy of GM

    Rear Side Door Check Link Body Side Bolt (1) - Remove

  4. GM5518390Courtesy of GM

    Mark the location of the rear side door hinges with a grease pencil to aid in alignment during installation.

  5. Support the door before removing the hinge fastener.
  6. Rear Side Door Hinge Bolt - Door Side (1) - Remove [4x]
  7. GM5519174Courtesy of GM

    With the aid of an assistant, remove the rear side door (1).

  8. Transfer components as necessary.
scientia non olet · About LEMON Manuals