LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Yukon XL AT4 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Liftgate Strut Bracket Replacement >> Installation Procedure

Installation Procedure

  1. GM5582427Courtesy of GM

    Liftgate Strut Bracket (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Liftgate Strut Bracket Bolt (1) - Install and tighten [2x] - Fastener Specifications 
  3. GM5581736Courtesy of GM
    NOTE:

    Ensure the clip is fully seated when the rod is reinstalled. If the clip cannot be fully seated, a new rod should be installed.

    Liftgate Strut (2) - Install

  4. Install the metal clip (1) to the top end of the liftgate strut (2).
  5. Check alignment of the liftgate and adjust if necessary. Liftgate Adjustment 
scientia non olet · About LEMON Manuals