LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Yukon XL AT4 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Primary and Secondary Latch Replacement >> Installation Procedure

Installation Procedure

  1. GM5573765Courtesy of GM

    Hood Primary Latch Release Cable (3) - Install

  2. Connect the electrical connector.
  3. Hood Primary and Secondary Latch (2) - Install
    4. CAUTION:

    Refer to Fastener Caution .

  4. Hood Primary and Secondary Latch Bolt (1) - Install and tighten [2x] - Fastener Specifications 
  5. GM5541732Courtesy of GM

    Intake Air Splash Shield (2) - Install

  6. Intake Air Baffle Retainer (1) - Install [9x]
  7. GM5541781Courtesy of GM

    Hood Secondary Latch Release Handle (2) - Install

  8. Hood Latch Actuator Bolt (1) - Install and tighten [2x] - Fastener Specifications 
scientia non olet · About LEMON Manuals