Hood Primary Latch Release Cable Replacement: Notes

Removal Procedure

1. Courtesy of GM

   Hood Latch Actuator Bolt (1) - Remove [2x]

2. Hood Secondary Latch Release Handle (2) - Remove

3. Courtesy of GM

   Intake Air Baffle Retainer (1) - Remove [9x]

4. Intake Air Splash Shield (2) - Remove

5. Courtesy of GM

   Disconnect the cable end retainer (1) from the latch.

6. Release the hood primary latch release cable from the retainer (2).

7. Courtesy of GM

   Disconnect the hood primary latch release cable (1) from the retainers (2).

8. Courtesy of GM

   Release the hood primary latch release cable handle (1) from the instrument panel lower trim panel outer filler.

9. Courtesy of GM

   Separate the hood primary latch release cable end retainer (1) from the inside handle (2).

10. Courtesy of GM

    Disconnect the hood primary latch release cable grommet (1) from the plenum upper panel.

11. Attach mechanics wire to the hood primary latch release cable (2) and pull the cable out.