Installation Procedure

Courtesy of GM

Attach the mechanics wire to the new hood primary latch release cable (2) and guide in plenum upper panel.

Courtesy of GM

Install the hood primary latch release cable end retainer (1) to the inside handle (2).

Courtesy of GM

Install the hood primary latch release cable handle (1) to the instrument panel lower trim panel outer filler.

Courtesy of GM

Attach the hood primary latch release cable (1) to the retainers (2).

Courtesy of GM

Attach the hood primary latch release cable to the retainer (2).

Courtesy of GM

Intake Air Splash Shield (2) - Install

Courtesy of GM

Hood Secondary Latch Release Handle (2) - Install