LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Yukon XL AT4 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front End Sheet Metal Diagonal Brace Replacement (Radiator) >> Removal Procedure

Removal Procedure

  1. GM5541781Courtesy of GM

    Hood Latch Actuator Bolt (1) - Remove [2x]

  2. Hood Secondary Latch Release Handle (2) - Remove
  3. GM5541732Courtesy of GM

    Intake Air Baffle Retainer (1) - Remove [9x]

  4. Intake Air Splash Shield (2) - Remove
  5. GM5572426Courtesy of GM
    NOTE:
    • Some components not shown for graphic clarity.
    • Right side shown, left side similar.

    Front End Sheet Metal Diagonal Brace Bolt (1) - Remove [2x]

  6. Front End Sheet Metal Diagonal Brace (2) - Remove
scientia non olet · About LEMON Manuals