LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Yukon XL AT4 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim - Repair Instructions >> Repair Instructions >> Instrument Panel Switch Trim Plate Replacement (without Denali) >> Installation Procedure

Installation Procedure

  1. GM5517140Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connectors.

  2. Instrument Panel Switch Trim Plate (2) - Install
    3. CAUTION:

    Refer to Fastener Caution .

  3. Instrument Panel Switch Trim Plate Bolt (1) - Install and tighten - Fastener Specifications
  4. GM5517141Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connectors.

  5. Instrument Panel Trim Pad (2) - Install
  6. Instrument Panel Trim Pad Bolt (1) - Install and tighten [ 2x ] - Fastener Specifications
  7. GM5517142Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Trim Plate Applique (1) - Install

  8. GM5517144Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Fuse Block Access Hole Cover (1) - Install

  9. GM5515686Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Outer Filler (1) - Install

scientia non olet · About LEMON Manuals