LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Yukon XL AT4 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim - Repair Instructions >> Repair Instructions >> Instrument Panel Switch Trim Plate Replacement (with Denali) >> Removal Procedure

Removal Procedure

  1. GM5515686Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Outer Filler (1) - Remove

  2. GM5596335Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  3. Instrument Panel Fuse Block Access Hole Cover (1) - Remove
  4. GM5596337Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Trim Pad Bolt (1) - Remove

  5. Using a flat-bladed plastic trim tool, release the retaining clips.
  6. Disconnect the electrical connectors.
  7. Instrument Panel Trim Pad (2) - Remove
  8. GM5596403Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Switch Trim Plate Bolt (1) - Remove

  9. Disconnect the electrical connectors.
  10. Instrument Panel Switch Trim Plate (2) - Remove
  11. GM5569085Courtesy of GENERAL MOTORS COMPANY

    Release the retaining tabs.

  12. Trailer Brake Control Switch (1) - Remove
  13. GM5607299Courtesy of GENERAL MOTORS COMPANY

    Release the retaining tabs.

  14. Headlamp Switch (1) - Remove
  15. GM5607302Courtesy of GENERAL MOTORS COMPANY

    Release the retaining tabs.

  16. Ride Control Switch (1) - Remove
scientia non olet · About LEMON Manuals