LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Yukon XL AT4 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim - Repair Instructions >> Repair Instructions >> Instrument Panel Lower Trim Panel Replacement - Left Side (with Denali) >> Removal Procedure

Removal Procedure

  1. GM5515684Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Insulator Retainer (1) - Remove [ 2x ]

  2. GM5515685Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Insulator (1) - Remove

  3. GM5562885Courtesy of GENERAL MOTORS COMPANY

    Release the retaining tab.

  4. Rotate the front floor courtesy lamp (1) a quarter turn counterclockwise to release.
  5. GM5562886Courtesy of GENERAL MOTORS COMPANY

    Front Floor Courtesy Lamp (1) - Remove

  6. Disconnect the electrical connector.
  7. GM5515686Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Outer Filler (1) - Remove

  8. GM5596335Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  9. Instrument Panel Fuse Block Access Hole Cover (1) - Remove
  10. GM5596337Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Trim Pad Bolt (1) - Remove

  11. Using a flat-bladed plastic trim tool, release the retaining clips.
  12. Disconnect the electrical connectors.
  13. Instrument Panel Trim Pad (2) - Remove
  14. GM5596403Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Switch Trim Plate Bolt (1) - Remove

  15. Disconnect the electrical connectors.
  16. Instrument Panel Switch Trim Plate (2) - Remove
  17. GM5517088Courtesy of GENERAL MOTORS COMPANY

    Hood Primary Latch Release Cable Handle (1) - Release

  18. Instrument Panel Knee Bolster Bolt (2) - Remove [ 2x ]
  19. GM5598940Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  20. Instrument Panel Fuse Block Access Hole Cover (1) - Remove
  21. GM5598941Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Trim Pad Bolt (1) - Remove

  22. Using a flat-bladed plastic trim tool, release the retaining clips.
  23. Disconnect the electrical connector.
  24. NOTE:

    Use care not to bend or deform the thin area of the instrument panel trim pad.

  25. Instrument Panel Trim Pad (2) - Remove
  26. GM5517090Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    You may have to push down on the lower steering column closeout to clear the instrument panel cluster trim plate.

    Instrument Panel Knee Bolster (1) - Remove

  27. GM5604836Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  28. Front Floor Console Applique (1) - Remove
  29. GM5604950Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Trim Plate Bolt (1) - Remove [ 3x ]

  30. Rear Floor Console Applique (2) - Remove
  31. GM5542561Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Bolt (1) - Remove [ 2x ]

  32. NOTE:

    Use a plastic trim tool if necessary.

  33. Instrument Panel Lower Trim Panel (2) - Remove