LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Yukon XL AT4 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim - Repair Instructions >> Repair Instructions >> Instrument Panel Center Trim Plate Applique Replacement (with Denali) >> Removal Procedure

Removal Procedure

  1. GM5598940Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  2. Instrument Panel Fuse Block Access Hole Cover (1) - Remove
  3. GM5598941Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Trim Pad Bolt (1) - Remove

  4. Using a flat-bladed plastic trim tool, release the retaining clips.
  5. Disconnect the electrical connector.
    6. NOTE:

    Use care not to bend or deform the thin area of the instrument panel trim pad.

  6. Instrument Panel Trim Pad (2) - Remove
  7. GM5599068Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Bolt (1) - Remove [ 5x ]

  8. Instrument Panel Center Trim Plate Applique (2) - Remove
  9. GM5605290Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Accessory Trim Plate Bolt (1) - Remove [ 4x ]

  10. Instrument Panel Center Trim Plate Applique (2) - Remove
scientia non olet · About LEMON Manuals