Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Head-Up Display Bezel (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Instrument Panel Upper Trim Panel Bolt (1) - Install and tighten - Fastener Specifications
Instrument Panel Upper Bolt (2) - Install and tighten [ 5x ] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector.
Radio Front Speaker (2) - Install
Radio Front Speaker Bolt (1) - Install and tighten [ 2x ] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Radio Front Speaker Grille (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Upper Trim Panel (2) - Install
Instrument Panel Upper Bolt (1) - Install and tighten [ 3x ] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Fuse Block Access Hole Cover (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Trim Panel Outer Filler (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Instrument Cluster Hood (3) - Install
Instrument Panel Upper Bolt (2) - Install and tighten [ 4x ] - Fastener Specifications
Instrument Panel Upper Trim Panel Bolt (1) - Install and tighten [ 2x ] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector.
Radio Front Center Speaker (2) - Install
Radio Front Center Speaker Bolt (1) - Install and tighten [ 2x ] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector.
Instrument Panel Extension (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Windshield Garnish Molding Bolt (2) - Install and tighten - Fastener Specifications
Connect the electrical connector.
Windshield Garnish Molding (1) - Install
Enable the SIR System. SIR Disabling and Enabling