LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Yukon XL AT4 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim - Repair Instructions >> Repair Instructions >> Front Floor Rear Console Side Trim Panel Replacement - Left Side (DCH without Denali) >> Removal Procedure

Removal Procedure

  1. GM5525884Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  2. Front Floor Console Lower Applique (1) - Remove
  3. GM5525886Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  4. Front Floor Console Applique (1) - Remove
  5. GM5536178Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Use a flat bladed plastic trim tool.

    Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Remove

  6. Front Floor Console Extension Bolt (2) - Remove
  7. Move the front seat to access the retainers.
  8. Front Floor Console Extension Panel (3) - Remove
  9. GM5536230Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  10. Front Floor Console Bolt Access Hole Cover (1) - Remove
  11. GM5537637Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    You may have to slide the armrest back to better access the retainers.

    Using a flat-bladed plastic trim tool, release the retaining clips.

  12. Front Floor Console Rear Trim Lower Panel (1) - Remove
  13. GM5537709Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  14. Front Floor Rear Console Side Trim Panel (1) - Remove