Installation Procedure
Front Floor Rear Console Side Trim Panel (1) - Install
Front Floor Console Rear Trim Lower Panel (1) - Install
Front Floor Console Bolt Access Hole Cover (1) - Install
Front Floor Console Extension Panel (3) - Install
- Front Floor Console Extension Bolt (2) - Install and tighten - Fastener Specifications
- Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Install
Rear Floor Console Applique (2) - Install
- Front Floor Console Trim Plate Bolt (1) - Install and tighten [ 3x ] - Fastener Specifications
Front Floor Console Applique (1) - Install
- Return the seat to the original position.
- Return the power armrest back to the original position.
CAUTION:
Refer to Fastener Caution .