LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Yukon XL AT4 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim - Repair Instructions >> Repair Instructions >> Front Floor Console Wiring Harness Replacement (DCH without Denali) >> Removal Procedure

Removal Procedure

  1. Front Seat - Right Side - Remove - Front Seat Removal and Installation
  2. GM5525884Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  3. Front Floor Console Lower Applique (1) - Remove
  4. GM5525886Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  5. Front Floor Console Applique (1) - Remove
  6. GM5536178Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Use a flat bladed plastic trim tool.

    Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Remove

  7. Front Floor Console Extension Bolt (2) - Remove
  8. Move the front seat to access the retainers.
  9. Front Floor Console Extension Panel (3) - Remove
  10. GM5536230Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  11. Front Floor Console Bolt Access Hole Cover (1) - Remove
  12. GM5537637Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    You may have to slide the armrest back to better access the retainers.

    Using a flat-bladed plastic trim tool, release the retaining clips.

  13. Front Floor Console Rear Trim Lower Panel (1) - Remove
  14. GM5537709Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  15. Front Floor Rear Console Side Trim Panel (1) - Remove
  16. GM5525885Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  17. Front Floor Console Lower Applique (1) - Remove
  18. GM5525888Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  19. Front Floor Console Applique (1) - Remove
  20. GM5536180Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Use a flat bladed plastic trim tool.

    Front Floor Console Extension Panel (1) - Remove

  21. GM5536231Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  22. Front Floor Console Bolt Access Hole Cover (1) - Remove
  23. GM5537710Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  24. Disconnect and reposition harness as necessary.
  25. Front Floor Rear Console Side Trim Panel (1) - Remove
  26. GM5536447Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Rear Cup Holder Liner (1) - Remove

  27. Front Floor Console Cup Holder Bolt (2) - Remove
  28. Using a flat-bladed plastic trim tool, release the retaining clips.
  29. Front Floor Console Rear Cup Holder (3) - Remove
  30. GM5536449Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Rear Cover Bolt (1) - Remove

  31. Using a flat-bladed plastic trim tool, release the retaining clips.
  32. Front Floor Console Rear Trim Panel (2) - Remove
  33. Disconnect the electrical connectors.
  34. GM5549158Courtesy of GENERAL MOTORS COMPANY

    Disconnect the front floor console bin lamp connector (1).

  35. GM5549160Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Use a suitable tool.

    Front Floor Console Armrest Hinge Clip (1) - Remove

  36. Front Floor Console Armrest Pivot Pin (2) - Remove
  37. Front Floor Console Armrest (3) - Reposition
  38. GM5577794Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Compartment Liner (1) - Remove

  39. Front Floor Console Bracket Bolt (2) - Remove [ 4x ]
  40. GM5577795Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Compartment (1) - Remove

  41. GM5544153Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Stowage Tray Bolt (1) - Remove [ 2x ]

    42. NOTE:

    Use a suitable tool.

  42. Front Floor Console Armrest Hinge Clip (2) - Remove
  43. GM5544156Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Armrest Pivot Pin (1) - Remove

  44. Front Floor Console Stowage Tray Bolt (2) - Remove [ 2x ]
  45. GM5544158Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Stowage Tray (1) - Remove

  46. GM5552325Courtesy of GENERAL MOTORS COMPANY

    Pull up on the rear of the front floor console cup holder trim plate (1) to start to release the retainer clips and work your way forward.

  47. Disconnect the electrical connectors.
  48. Front Floor Console Cup Holder Trim Plate (1) - Remove
  49. GM5552326Courtesy of GENERAL MOTORS COMPANY

    Disconnect and reposition harness as necessary.

  50. Front Floor Console Retainer Bolt (1) - Remove [ 2x ]
  51. Front Floor Console Intermediate Bracket Bolt (2) - Remove [ 4x ]
  52. Front Floor Console Carrier (3) - Remove
  53. Disconnect and reposition harness as necessary.
  54. GM5577808Courtesy of GENERAL MOTORS COMPANY
    NOTE:
    • Quantity of clips and routing of the front floor console wiring harness may vary based on option content.
    • Some components not shown for graphic clarity.

    Release the wiring harness clips and remove the front floor console wiring harness (1).

  55. GM5577810Courtesy of GENERAL MOTORS COMPANY
    NOTE:
    • Quantity of clips and routing of the front floor console wiring harness may vary based on option content.
    • Some components not shown for graphic clarity.

    Release the wiring harness clips and remove the front floor console wiring harness (1).

scientia non olet · About LEMON Manuals