Installation Procedure
Front Floor Console Wiring Harness (1) - Install
Front Floor Console Wiring Harness (1) - Install
Front Floor Console Wiring Harness (1) - Install
Connect the electrical connectors.
- Front Floor Console Cup Holder Trim Plate (1) - Install
Front Floor Rear Console Side Trim Panel (1) - Install
Connect the electrical connectors.
- Front Floor Console Rear Trim Panel (2) - Install
- Front Floor Console Rear Cover Bolt (1) - Install and tighten - Fastener Specifications
Front Floor Console Rear Cup Holder (3) - Install
- Front Floor Console Cup Holder Bolt (2) - Install and tighten - Fastener Specifications
- Front Floor Console Rear Cup Holder Liner (1) - Install
Connect and position the wiring harness.
- Front Floor Console (1) - Install
Front Floor Console Retainer Bolt (1) - Install and tighten [ 2x ] - Fastener Specifications
- Front Floor Console Bolt (2) - Install and tighten [ 4x ] - Fastener Specifications
Front Floor Console Bolt Access Hole Cover (1) - Install
Front Floor Console Extension Panel (1) - Install
Front Floor Console Applique (1) - Install
Front Floor Console Lower Applique (1) - Install
Front Floor Console Bolt Access Hole Cover (1) - Install
Front Floor Console Extension Panel (3) - Install
- Front Floor Console Extension Bolt (2) - Install and tighten - Fastener Specifications
- Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Install
Front Floor Console Applique (1) - Install
Front Floor Console Lower Applique (1) - Install
Front Seat (2) - Install (2) - Front Seat Removal and Installation
Refer to Fastener Caution .
Make sure the liner is properly seated under the front floor console compartment bezel.