Removal Procedure
Front Seat (2) - Reposition [ 2x ] - Front Seat Removal and Installation
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Applique (1) - Remove
Front Floor Console Trim Plate Bolt (1) - Remove [ 3x ]
- Rear Floor Console Applique (2) - Remove
- NOTE:
Use a flat bladed plastic trim tool.
Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Remove
- Front Floor Console Extension Bolt (2) - Remove
- Front Floor Console Extension Panel (3) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Bolt Access Hole Cover (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Applique (1) - Remove
Front Floor Console Trim Plate Bolt (1) - Remove [ 3x ]
- Rear Floor Console Applique (2) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Rear Console Side Trim Panel (1) - Remove
- NOTE:
Use a flat bladed plastic trim tool.
Front Floor Console Extension Panel (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Bolt Access Hole Cover (1) - Remove
Front Floor Console Retainer Bolt (1) - Remove [ 2x ]
- Front Floor Console Bolt (2) - Remove [ 4x ]
Slide the front floor console (1) back to clear the instrument panel accessory bezel.
Pull up on the rear of the front floor console cup holder trim plate (1) to start to release the retainer clips and work your way forward.
- Disconnect the electrical connectors.
- Front Floor Console Cup Holder Trim Plate (1) - Remove