Removal Procedure
Front Floor Console - Remove - Front Floor Console Removal and Installation (D07 without Denali) , or Front Floor Console Removal and Installation (DCH without Denali) , or Front Floor Console Removal and Installation (D07 with Denali) , or Front Floor Console Removal and Installation (DCH with Denali)
- Create a work area large enough to lay the front floor console out without damaging the panels.
Front Floor Console Rear Cup Holder Liner (1) - Remove
- Front Floor Console Cup Holder Bolt (2) - Remove
- Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Rear Cup Holder (3) - Remove
Front Floor Console Rear Cover Bolt (1) - Remove
- Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Rear Trim Panel (2) - Remove
- Disconnect the electrical connectors.
Using a suitable plastic trim tool, release the retaining tabs.
- Front Floor Rear Console Side Trim Panel (1) - Remove
- Front Floor Console Cup Holder Trim Plate (2) - Remove
- Disconnect the electrical connectors.
Front Floor Console Intermediate Bracket Bolt (1) - Remove [ 2x ]
Front Floor Console Compartment Bolt (1) - Remove [ 2x ]
- Front Floor Console Rear Bracket Bolt (2) - Remove [ 3x ]
Disconnect the electrical connector and remove the front floor console bracket (1), front floor console intermediate bracket (2) and front floor console compartment cooler (3) as an assembly.
Front Floor Console Compartment Cooler Bolt (1) - Remove [ 4x ]
- Front Floor Console Compartment Cooler (2) - Remove