LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Yukon XL AT4 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim - Repair Instructions >> Repair Instructions >> Front Floor Console Base Replacement (DCH with Denali) >> Removal Procedure

Removal Procedure

  1. GM5573683Courtesy of GENERAL MOTORS COMPANY

    Front Seat (2) - Remove [ 2x ] - Front Seat Removal and Installation

  2. GM5604836Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  3. Front Floor Console Applique (1) - Remove
  4. GM5604950Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Trim Plate Bolt (1) - Remove [ 3x ]

  5. Rear Floor Console Applique (2) - Remove
  6. GM5607511Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Use a flat bladed plastic trim tool.

    Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Remove

  7. Front Floor Console Extension Bolt (2) - Remove
  8. Front Floor Console Extension Panel (3) - Remove
  9. GM5536230Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  10. Front Floor Console Bolt Access Hole Cover (1) - Remove
  11. GM5537637Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    You may have to slide the armrest back to better access the retainers.

    Using a flat-bladed plastic trim tool, release the retaining clips.

  12. Front Floor Console Rear Trim Lower Panel (1) - Remove
  13. GM5537709Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  14. Front Floor Rear Console Side Trim Panel (1) - Remove
  15. GM5604837Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  16. Front Floor Console Applique (1) - Remove
  17. GM5604951Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Trim Plate Bolt (1) - Remove [ 3x ]

  18. Rear Floor Console Applique (2) - Remove
  19. GM5607514Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Use a flat bladed plastic trim tool.

    Front Floor Console Extension Panel (1) - Remove

  20. GM5536231Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  21. Front Floor Console Bolt Access Hole Cover (1) - Remove
  22. GM5537710Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  23. Disconnect and reposition harness as necessary.
  24. Front Floor Rear Console Side Trim Panel (1) - Remove
  25. GM5606861Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Bolt (1) - Remove [ 2x ]

  26. Front Floor Console Retainer Bolt (2) - Remove
  27. GM5606862Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Retainer Bolt (1) - Remove

  28. Front Floor Console Bolt (2) - Remove [ 2x ]
  29. GM5536447Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Rear Cup Holder Liner (1) - Remove

  30. Front Floor Console Cup Holder Bolt (2) - Remove
  31. Using a flat-bladed plastic trim tool, release the retaining clips.
  32. Front Floor Console Rear Cup Holder (3) - Remove
  33. GM5536449Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Rear Cover Bolt (1) - Remove

  34. Using a flat-bladed plastic trim tool, release the retaining clips.
  35. Front Floor Console Rear Trim Panel (2) - Remove
  36. Disconnect the electrical connector.
  37. Disconnect the front floor console bin lamp connector.
  38. GM5549160Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Use a suitable tool.

    Front Floor Console Armrest Hinge Clip (1) - Remove

  39. Front Floor Console Armrest Pivot Pin (2) - Remove
  40. Front Floor Console Armrest (3) - Reposition
  41. GM5577794Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Compartment Liner (1) - Remove

  42. Front Floor Console Bracket Bolt (2) - Remove [ 4x ]
  43. GM5577795Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Compartment (1) - Remove

  44. GM5544153Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Stowage Tray Bolt (1) - Remove [ 2x ]

  45. NOTE:

    Use a suitable tool.

  46. Front Floor Console Armrest Hinge Clip (2) - Remove
  47. GM5544156Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Armrest Pivot Pin (1) - Remove

  48. Front Floor Console Stowage Tray Bolt (2) - Remove [ 2x ]
  49. GM5544158Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Stowage Tray (1) - Remove

  50. GM5549159Courtesy of GENERAL MOTORS COMPANY

    Release the 2 front floor console armrest cable retainers.

  51. Disconnect the front floor console armrest cable (1) from the cable union.
  52. Front Floor Console Armrest - Remove
  53. GM5606985Courtesy of GENERAL MOTORS COMPANY

    Slide the front floor console (1) back to clear the instrument panel accessory bezel.

  54. GM5606992Courtesy of GENERAL MOTORS COMPANY

    Pull up on the rear of the front floor console cup holder trim plate (1) to start to release the retainer clips and work your way forward.

  55. Disconnect the electrical connectors.
  56. Front Floor Console Cup Holder Trim Plate (1) - Remove
  57. GM5607906Courtesy of GENERAL MOTORS COMPANY

    Disconnect and reposition harness as necessary.

  58. Front Floor Console Intermediate Bracket Bolt (1) - Remove [ 4x ]
  59. Front Floor Console Carrier (2) - Remove
  60. GM5577803Courtesy of GENERAL MOTORS COMPANY

    Disconnect and reposition harness as necessary.

  61. Front Floor Console Base (1) - Remove
  62. Transfer components as necessary.