X419 Body Harness to Power Inverter Module Jumper Harness (KI5)

Courtesy of GENERAL MOTORS COMPANY	Courtesy of GENERAL MOTORS COMPANY
Connector Part Information Harness Type: Body OEM Connector: 35105595 Service Connector: 13513604 Description: 14-Way F 1.5, 2.8 YESC Series (BK)	Connector Part Information Harness Type: Power Inverter Module Jumper OEM Connector: 10846900 Service Connector: Service by Harness - Description: 14-Way M 1.5, 2.8 YESC Series (L-GY)

Terminal Part Information

Terminal Type ID	Terminated Lead	Diagnostic Test Probe	Terminal Removal Tool
I	13575850	J-35616-14 (GN)	J-38125-557
II	84962855	J-35616-4A (PU)	J-38125-11A
III	Not required	J-35616-3 (GY)	No Tool Required
IV	Not required	J-35616-5 (PU)	No Tool Required

Pin	Size	Color	Circuit	Terminal Type ID	Option	Function	Pin	Size	Color	Circuit	Terminal Type ID	Option
1	0.75	BK	686	II	-	230 VAC Outlet Phase A 230 VAC Outlet Phase A	1	0.75 0.75	BN BK	686 686	IV IV	- -
2	0.5	VT/RD	4049	I	-	AC Power Outlet Sensor High Reference	2	0.5	VT/RD	4049	III	-
3	0.5	VT/WH	1139	I	-	Run/Crank Ignition 1 Voltage	3	0.5	VT/WH	1139	III	-
4	0.5	WH/GN	4628	I	-	DC/AC Inverter Relay Control	4	0.5	WH/GN	4628	III	-
5	0.75	BU/BN	6807	I	-	DC/AC Inverter Control	5	0.5	BU/BN	6807	III	-
6	-	-	-	-	-	Not Occupied	6	-	-	-	-	-
7	0.5	BK/WH	2262	II	-	230V AC Phase A 2	7	0.75	BN/WH	2262	IV	-
8	0.75	RD	6865	II	-	230V AC Phase B	8	0.75	BU	6865	IV	-
9	0.5	Bare	2526	I	-	230V AC Outlet Low Reference	9	0.5	BARE	2526	III	-
10	0.5	GN/BU	6133	I	-	Body Control Module LIN Bus 2	10	0.5	GN/BU	6133	III	-
11	-	-	-	-	-	Not Occupied	11	-	-	-	-	-
12	0.75	GN/BN	2266	I	-	DC/AC Inverter Control 2	12	0.5	GN/BN	2266	III	-
13	0.5	BARE	2544	I	-	230V AC Outlet 2 Low Reference	13	0.5 0.5	BARE Bare	2544 2544	III III	- -
14	0.5	RD/WH	2263	II	-	230V AC Phase B 2	14	0.75	BU/WH	2263	IV	-